Yealink: register a SIP account
Before you start, have your ArmourTel SIP credentials to hand. The SIP username, password and server are in your ArmourTel portal. Each account needs its own credentials.
Log in to the phone
- Find the IP address and open the phone web page as described in Yealink: find the IP address and log in.
- Log in as administrator. The factory default is admin / admin.
Configure the account
- Go to Account → Register and open Account 1.
- Set Line Active to Enabled.
- Enter Register Name, User Name and Password from your portal.
- Enter the SIP Server from your portal.
- Leave Transport on UDP unless we have told you to use TLS.
- Press Confirm.
Check it worked
Go to Status → Account Status. The account should show Registered. If it does not, see Phone will not register and check that SIP ALG is disabled on your router.