Fanvil DECT: register a handset to the base station
Fanvil DECT systems use a base station with cordless handsets. As with other DECT systems the SIP account is configured on the base station and the handset is registered to the base.
Register the SIP account on the base
- Find the base station IP address on its display and open the base web page.
- Log in as admin.
- Open Line → SIP or Account → Line 1 and enter the SIP username, password and server from your ArmourTel portal.
- Set the line to active and apply.
Register a handset
- On the base web page open DECT → Handset Registration, or Handset → Register, and start registration.
- On the handset press Menu → Settings → Registration → Register, or hold the registration soft key.
- Select the base when it appears and wait for confirmation.
Assign the handset to a line
On the base web page, make sure the registered handset is assigned to the SIP line. A handset registered to the base but not assigned to a line will show as having no service.
If it will not register
- The base only accepts new handsets for a short period after you start registration, so work quickly and keep the handset near the base.
- A handset already registered to a different base must be deregistered from that base first, or reset.