Fanvil: register a SIP account

Have your ArmourTel SIP credentials ready. The SIP username, password and server are in your ArmourTel portal.

Log in to the phone

  1. Find the IP address and open the phone web page as described in Fanvil: find the IP address and log in.
  2. Log in as admin.

Configure the line

  1. Go to Line → SIP and open Line 1. On some firmware this is Account → Line 1.
  2. Set Line Active, or Activate, to On.
  3. Enter the SIP username in Register Name and User Name.
  4. Enter the SIP password in Password.
  5. Enter the SIP Server from your portal, and the same value in SIP Proxy if that field is present.
  6. Set SIP Transport to UDP unless we have told you to use TLS.
  7. Click Apply or Submit.

Check it worked

Go to Status → Line Status. The line should show Registered. If it does not, see Phone will not register and confirm SIP ALG is disabled on the router.

ArmourTel · www.armour.tel · support@armour.tel