Fanvil: factory reset a phone

A factory reset removes all settings including SIP accounts and the administrator password. If ArmourTel supplied the phone pre-configured it will need setting up again, so try a reboot first.

From the phone menu

  1. Press Menu → Settings → Advanced Settings and enter the administrator password (factory default admin).
  2. Choose Reset to Factory or Factory Reset.
  3. Confirm and wait for the phone to restart.

From the web page

  1. Log in as administrator and open System → Configuration, or Management → Reset.
  2. Choose Reset to Factory Settings and confirm.

With the reset button

On many Fanvil models you can power the phone on while holding the # key, or press and hold the reset button on the underside for around 10 seconds until the screen prompts you.

After the reset

The device will request a new address by DHCP and fall back to 192.168.1.1 if it cannot get one. The administrator password returns to admin. Re-register the account using Fanvil: register a SIP account.

ArmourTel · www.armour.tel · support@armour.tel