Snom: factory reset a desk phone
A factory reset clears all settings including SIP identities and the administrator password. If ArmourTel supplied the phone pre-configured it will need setting up again, so try a reboot before resetting.
From the phone menu
- Press the Settings key and open Maintenance, or Settings → Advanced on older firmware.
- Choose Reset to factory defaults or Reset.
- Enter the administrator password when prompted (factory default admin or 0000) and confirm.
With the reset button
- With the phone powered on, press and hold the reset button on the underside of the phone.
- Hold for around 10 seconds until the display shows that the reset is in progress.
- Release and wait for the phone to restart.
After the reset
The phone will request a new address by DHCP and the administrator password returns to the factory default. Re-register the identity using Snom: register a SIP identity.