Snom: find the IP address and log in
Snom phones are configured from their own web page. The phone takes its address by DHCP, so you need to read it off the display first.
Find the IP address on the phone
- On an idle Snom desk phone the IP address is usually shown on the screen. If it is not, press the Settings key (the gear) and look under Information, or press Menu → Information → IP Address.
- Note the value, for example 192.168.1.64.
Log in
- Enter that address into a browser on a computer on the same network, for example http://192.168.1.64
- Log in as admin. On most models the factory default password is also admin, on some it is 0000.
If the page will not load
- Make sure the computer is on the same network as the phone.
- Snom phones do not have a fixed fallback address, so a phone with no DHCP lease will not be reachable. Check the display for an address ending in .0.0.0 or similar.
- If ArmourTel supplied the phone pre-configured the administrator password will not be the default. Ask us and we will provide it.