Fanvil: find the IP address and log in
Fanvil phones and DECT bases are configured from their own web page. You need the device address first.
Find the IP address on the device
- Press the Menu or OK key and open Status, or Menu → Status → Network.
- Note the IP or IP Address value.
Log in
- Enter that address in a browser on the same network, for example http://192.168.1.1
- Log in as admin / admin, which is the factory default.
If the page will not load
- A Fanvil device that cannot get an address by DHCP usually falls back to 192.168.1.1. Connect a computer to the same switch and try that address.
- Some models use 192.168.0.1 instead. Check the display if you are unsure.
- If ArmourTel supplied the device pre-configured the administrator password will not be the default. Ask us and we will provide it.