TP-Link: disable SIP ALG

SIP ALG rewrites SIP packets and is a frequent cause of phones that will not register or that lose audio mid-call. The setting moves around a lot between TP-Link models, so the list below covers the usual places.

For background see SIP ALG: what it is and how to disable it.

Where to look

  • Archer routers: Advanced → NAT Forwarding → ALG, then clear SIP.
  • Some Archer firmware: Advanced → Security → ALG.
  • Older models: Forwarding → ALG or Security → ALG.
  • Business and Omada routers, such as the ER605: Transmission → NAT → ALG, then disable SIP ALG.

Steps

  1. Log in to the router web interface as administrator.
  2. Find the ALG page as above. If you cannot find it, use the router search box for the word ALG.
  3. Clear the SIP checkbox. Clear RTSP and H.323 as well if they are offered.
  4. Save, then reboot the router and power-cycle the phones.

If there is no ALG setting

Deco mesh systems are the common problem here. Most Deco models run SIP ALG with no setting to turn it off. If you are seeing registration failures or one-way audio on a Deco network, the practical options are to add a router that can disable ALG in front of the Deco, or to replace it. Raise a ticket and we will advise on the specific model.

ArmourTel · www.armour.tel · support@armour.tel